A Siemens Energy SGT-400 gas turbine at the Smurfit Westrock paper mill in Saillat-sur-Vienne, France, has run on pure hydrogen from start-up to full load while delivering power and process steam to the mill. Siemens Energy announced the result of the EU-funded HyCoFlex project on 16 November and says it is the first time a dry low-emissions (DLE) gas turbine has gone through a complete operating cycle on 100% hydrogen at an industrial site.
What Was Tested
The SGT-400 at the mill is rated at up to 12 MW electrical and 20 MW thermal, according to the release. In the test campaign, now finished, the turbine started on hydrogen alone with no start-up fuel, carried full load in cogeneration and was run through hydrogen and natural gas blends, fast load changes and rapid changes in hydrogen content. Siemens Energy speaks of low NOx emissions from its high-hydrogen DLE combustion system, without giving values, and of a full emissions and performance data set that the partners now hold. The hydrogen was renewable, the company says.
Siemens Energy coordinated the consortium of ENGIE, Smurfit Westrock, Equinor, the German Aerospace Center (DLR), the National Technical University of Athens, PNO Innovation and CENTRAX. Funding came from the Clean Hydrogen Joint Undertaking under Horizon Europe, with UK Research and Innovation supporting the UK partners. HyCoFlex follows the earlier HYFLEXPOWER project at the same mill, which had combined local hydrogen production with power generation in the CHP plant.
The Bill For The Fuel
Not everyone reads it as a breakthrough. In a CleanTechnica analysis on 19 November, Michael Barnard of TFIE Strategy counts about EUR 16.5 million of public money across the two projects and the UK support, and argues that it proved again that hydrogen burns in a turbine without showing that it makes sense as the mill's fuel. He points to figures from a 2024 Siemens article: the electrolyser at the site produces 16.4 kg of hydrogen an hour, while the turbine needs about 810 kg an hour at 10 MW, so local production covers around 2% of the fuel, and later tests ran on hydrogen delivered to the site. The 2026 release gives no hours at full load on hydrogen, no fuel price and no cost of the steam or electricity. Barnard would rather see the same money compared against heat pumps, vapour recompression and electric boilers.
Both points can stand side by side. For operators of existing turbines the engineering result matters: a DLE machine that starts and runs on hydrogen keeps open the option to blend later without a new combustion system. Whether the fuel will ever be there at a price that a paper mill can pay is a separate question, and the test was not built to answer it. We covered GE Vernova's hydrogen runs on aeroderivative units earlier this month; more on turbine plant is on our gas turbine page.
Sources: Siemens Energy, CleanTechnica, Gas to Power Journal
